Power tools are fantastic facilitators, and having them allows us to accomplish things that we couldn’t accomplish otherwise or speed up the work we have to do

We’ve relied on them for more than a century, and they’re still evolving and gaining capabilities. When deciding between different power tools, the most crucial factor to consider is whether they have the power to get the task done. A particular amount of torque is required to cut through steel or machine-tighten a bolt. Choosing a tool based on its convenience or affordability is pointless if it isn’t powerful enough to complete the job. The most commonly used tools on the market are pneumatic tools and electric tools.

Pneumatic Tools

Pneumatic tools are tools that run on compressed air rather than electricity.  Air compressors deliver air volume and pressure to a pneumatic tool  in cubic feet per minute (CFM) and pounds per square inch (PSI). Pneumatic tools are well-known for their strength and durability. As a result, they have become a standard tool in locations such as machine shops, construction sites, and assembly lines. Every time, air tools were the undisputed leaders in this area. This was especially true with cordless electric equipment, which lacked the same power. Some of the common pneumatic tools are impact wrenches, torque wrenches, air wrenches, pneumatic drill machines, grinders, and sanders.

Electric Tools

Electric tools are tools that operate either on electricity or batteries. Power tools with cords or batteries are generally referred to as “cordless” or “corded.” Wireless electrical tools are significantly easier to use and should be a standard in difficult-to-reach regions. The operator is not attached to an air compressor and is not at risk of stumbling over cables. Hand drills, hammer drills, electric wrenches, electric screwdrivers, etc., are common electric power tools. 

Making the right choice between air tools or electric tools

Electric tools have their advantages, but the dispute over pneumatic vs. electrical tools has persisted for some time. Although each tool has merits, one is obviously superior to the other. Let us discuss some of the merits and demerits of the tools.

Enhanced Power-to-Weight Ratio

A larger power output per given weight can contribute to a more comfortable operating experience. The extra power also allows the operator to accomplish the task faster, whereas an electric tool of the same size produces less output. Electric tools are becoming more powerful, but with increased power comes an increase in price per tool.

Low Operating Temperatures

Because air tools seldom create much heat when used, they pose less of a threat of destroying your power equipment during continuous use. It holds true in the case of impact wrenches. Unlike its electric equivalent, the pneumatic impact wrench does not become hot. The flowing pressurised air cools any heat generated by the revolving parts inside the impact pistol. This makes the air impact wrench perfect for assembly lines since it can be used for long periods of time without overheating. 

Non-hazardous

  Pneumatic tools do not pose the risk of electric shock owing to cables or batteries, even when exposed to fluids such as coolant or water. Electric tools like electric torque wrenches may overheat when used frequently, and since they are powered by electricity, they are always less safe to use in damp conditions.

Overall Cost

Although the initial investment in pneumatic tools is quite a lot, needing a compressor, hoses, and regulators, the actual tools are often less expensive to acquire than their electric equivalents.

The few disadvantages of pneumatic fastening tools are the cost of the initial set up, air hoses that do not allow easy movement, and the compressor, which takes a long time to fill.

The advantages that electric tools enjoy over pneumatic tools are:

Simple to use

Electric tools that are corded may easily be plugged in and operated. They don’t require much setup and almost no upkeep.

Adaptability

Because there are no wires or pipes connecting them to a power source, battery-powered electric tools give you incredible flexibility in how you use them.

A variety of tools

The large range of electric equipment available dwarfs the range of pneumatic tools.

Conclusion

Many users assume that one product type is optimal for all applications. Finally, it depends on the application and what you’re attempting to accomplish. You can only make an educated selection if you have a thorough awareness of your requirements as well as knowledge of the various technologies that power the tools-whether pneumatic or electric.

Since 1972, IEC Air Tools Pvt. Ltd. has been one of the leading producers of industrial pneumatic tools located in Pune, India. The company is likely India’s largest maker of air tools, and products are used by top manufacturers. Their products are deployed in the ancillary units of automobile and motorcycle manufacturing facilities and white goods industries.

IEC Air Tools is also the authorised distributor for Durofix, Taiwan, and offers Durofix, portable power tools. Cordless Pulse Tools, Precision Tools, Impact Wrenches, and Impact Drivers are among their most popular products in India, available at reasonable prices. If you would like to know more about their products and prices, do drop a line at contact@iecairtools.com or call +91 (20) 25651484 or 25651241.

0 CommentsClose Comments

Leave a comment

Newsletter Subscribe

Get the Latest Posts & Articles in Your Email

[mc4wp_form id=”517″]

We Promise Not to Send Spam:)