Salient Features of Accura FT Series Transducerised Pulse Tools
Integrated rotary strain gauge type transducer with high accuracy 0.5% of full scale
The accura pulse FT tools are unique and are registered design
Multicolor LEDs mounted in front of the tool indicating work progress & Cycle OK/NOK status easily visible to the operator a Unique Feature, no need to check at controller end
Complete fastening process control
Easy initial engagement of fastener
Powerful Double Chamber Air Motor
Double Blade Pulsing Mechanism
Durable Performance
Fast and Accurate tightening
Increased MTBF
Wear and Tear of the tool is minimised as excessive running of the tool is controlled
Zero torque reaction on shut off. This eliminates the need of reaction arm and related expensive accessories
Saves compressed air energy
Low Noise and Lesser Vibrations
Reduction in operator fatigue
Modular design ensures Easy Maintenance
All major parts of the tool are from the proven Accura Pulse Series tools which translates to
TC + TV = FT
Specifications
Model | Capacity Bolt Size | Free | Torque Adjustment Range | Square Drive Shank | Weight | Overall Length | Air Inlet Thread | Air Hose Size | Air Pressure | |
MM | RPM | (N-m) | MM | Kg | MM | BSP | MM | Kg/Cm2 | ||
Min | Max | |||||||||
IAP-6FT # | M8 | 7000 | 15 | 35 | 9.5 | 1.65 | 197.5 | 1/4” | 9.5 | 6.0 |
IAP-6FTD | M8 | 7000 | 15 | 25 | 6.35* | 1.65 | 200.5 | 1/4” | 9.5 | 6.0 |
IAP-8FT # | M8-M10 | 6000 | 35 | 70 | 9.5 | 1.75 | 219.5 | 1/4” | 9.5 | 6.0 |
# Registered Design
*Anvil Drive HEX
Salient features of FT (Fastening Torque) Series Controller – CMS (FT)
Models Available
B4 : Four batches with same torque settings
BT-2 : Two batches with different torque settings
Large 7″ capacitive, multicolour touch screen interface displaying fastening torque & cycle status OK/NOK
* Provision to skip batch – 2 learning, after completing Batch – 1 learning.
* Master reset, to erase all learnt data for Batch 1 & 2.
* Direct toggle between Batches.
Closed-loop torque control & torque validation (Date & Time stamped) when used with FT Series TransducerisedAccura Pulse Tools
Precise Torque Control & Multiple parameter Set Capability
Storage Capacity of 10000 Fastening cycles in internal memory and 2/8/16GB USB compatible for taking rundowns backup more than 50,000 readings can be stored.
Error proofing of Process
Cycle OK/NOK
Batch OK/NOK
Early and mid-trigger release
Re-hit
Transducer cable fault
Preventive Maintenance Alarm
Extra 2 Outputs (Batch OK & Cycle NOK) that can be integrated with your line for further process control
Free run NOK
Cross Thread Detection
As process is controlled and monitored, tools operate with better accuracy
Simultaneous rundown recording via Ethernet
Provision to interface printer / scanner with FT controller on customer demand
Energy saving as tool shuts off on reaching desired fastening torque with accuracy and control. Free running of tool or excessive running of the tool is totally avoided as the controller declares NOK and raises alarm
TCO : CMS FTsystem offers great value and services. Life cycle of the product and total cost of ownership is rewarding as the cost of components and electronics is competitive as compared to other options available in the industry.